Need help?Do you have a question about the McIntosh MC 7300 and is the answer not in the manual?
General| Power Output per Channel | 300 watts |
|---|---|
| Total Harmonic Distortion (THD) | 0.005% |
| Input Sensitivity | 1.0 V |
| Dynamic Headroom | 1.5 dB |
| Frequency Response | 20 Hz - 20 kHz |
| Dimensions (W x H x D) | 17.5 x 19.5 inches |
| Input Impedance | 22k Ohms |
| Weight | 34kg (75 lbs) |
Steps for securely mounting the unit using the PANLOC system.
Connecting RCA cables for stereo operation using unbalanced inputs.
Connecting XLR cables for stereo operation using balanced inputs.
Using the MODE switch for mono operation via right channel inputs.
Connecting speakers to left and right output terminals for stereo sound.
Configuring the amplifier for single-channel mono output by bridging channels.
Feature protecting against clipping distortion and speaker damage.
Circuit protecting output transistors from destructive current levels.
System preventing overheating by automatically shutting down the amplifier.
To Next Page
