McIntosh MC1502 User Manual

9
Rear Panel Connections, Fuse Holder and Switches
BALANCED INPUTS UNBALANCED
INPUTS
POWER
CONTROL
INPUT MODE
AUTO OFF
COM
R OUTPUT
CLASS 2 WIRING
COM
L OUTPUT
CLASS 2 WIRING
MC1502
POWER AMPLIFIER
McINTOSH LABORATORY, INC., BINGHAMTON, NY
HANDCRAFTED IN USA WITH US AND IMPORTED PARTS
BALANCED
UNBALANCED
ENABLED
DISABLED
T8AL 250V
120V 50/60Hz
5.5 AMPS
FUSE
PUSH
INPUT MODE switch
selects between BALanced
and UNBALanced Input
Connections
AUTO OFF ENABLE or
DISABLE the Power Saving
Circuitry
RIGHT OUTPUTS for Class 2
Wiring Connections for a
2, 4 or 8 ohm Loudspeakers
LEFT OUTPUTS for Class 2
Wiring Connections for a
2, 4 or 8 ohm Loudspeakers
FUSE HOLDER, refer to
the nomenclature next to
the fuse holder to deter-
mine the correct fuse size
and rating
CONNECT the MC1502 POWER
CORD to a live AC outlet. Refer
to the nomenclature below this AC
Socket to determine the correct
voltage
BALANCED INPUT CONNECTORS
for the Right and Left Channels with
Audio Cables Connected from a Pre-
amplifier or A/V Control Center audio
output
UNBALANCED INPUT CONNECTORS
for the Right and Left Channels with Au-
dio Cables Connected from a Preamplifier
or A/V Control Center audio output
POWER CONROL IN
receives a turn ON or turn OFF signal from a
McIntosh component.
POWER CONTROL OUT
sends a turn ON or turn OFF signal to the next
McIntosh Component

McIntosh MC1502 Specifications

General

Brand	McIntosh
Model	MC1502
Category	Amplifier
Language	English