McIntosh MT5 User Manual

15
MT5
How to Connect the Turntable
1. Connect a Power Control Cable from the
MT5 POWER CONTROL IN to the POWER
CONTROL MAIN Output jack of a McIntosh
Preamplifier or A/V Control Center.
2. Optionally, connect a Power Control Cable
from the MT5 POWER CONTROL OUT to
the POWER CONTROL IN jack of a McIntosh
source component.
3. Connect a wire from the MT5 GND (Ground)
Post to the GND (Ground) post on the McIntosh
Preamplifier or A/V Control Center.
4. Connect Audio Cables from the MT5 OUT L and
R jacks to the MM (Moving Magnet) Inputs on a
McIntosh Preamplifier or A/V Control Center.
Notes: 1. For additional information about obtaining
optimum performance from the installed phono
cartridge, refer to page 17 “Phono Cartridge
Loading”.
2. Contact your McIntosh Dealer for additional
information and assistance.
5. Connect the supplied AC / DC Adapter to the
MT5 DC IN 12V socket and the Power Supply to
a live AC outlet.
MT5
AC/ DC
Adapter
Preamplier

McIntosh MT5 Specifications

General

Brand	McIntosh
Model	MT5
Category	Turntable
Language	English