McIntosh MT5 User Manual

19
MT5
Packing Instructions
In the event it is necessary to repack the equipment
for shipment, the equipment must be packed exactly
as shown below. It is very important the four feet
are still attached to the bottom of the equipment.
This will ensure the proper equipment location on
the Platter foam pads. Failure to do this will result
in shipping damage.
Use the original shipping carton and interior parts
only if they are all in good serviceable condition.
If a shipping carton or any of the interior part(s)
are needed, please call or write Customer Service
Department of McIntosh Laboratory. Refer to page 3.
Please refer to the Part List below for the correct part
numbers.
Quantity Part Number Description
1 310528SP Shipping Carton only
1 310533SP Top Foam Pad
1 310532SP Cover Foam Pad
1 310531SP Accessory Pack Foam
2 310530SP Turntable Foam
2 310529SP Platter Foam Pad
Outer Platter
Owner’s Manual Packet
with Tone Arm/Cartridge
Alignment Gauge
Dust Cover
Inner Platter
Tur ntable
Center Spindle
Tone Ar m
Counter Weight
Record Clamp
Accessory Pack Foam
Ac/Dc Adapter
Tur ntable Foam
Cover Foam Pad
Top Foam Pad
Shipping Carton
Record Mat
Platter Foam
Accessory Pack Foam
Tur ntable Foam
Platter Foam

McIntosh MT5 Specifications

General

Brand	McIntosh
Model	MT5
Category	Turntable
Language	English