EasyManua.ls Logo

McIntosh MX113

McIntosh MX113
24 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
10 millivolts produces 1.2 volts output. FM and
will produce 1.2 volts output at 100% modulation.
L + R: 2 volts with rated input
GENERAL
TRANSISTOR COMPLEMENT
2-JFET
3—MOSFET
30—Silicon Planar
31—Diodes
2 Integrated Circuits—(each contains the equivalent of
16 transistors and 8 diodes)
POWER REQUIREMENTS
120 volts, 50/60 Hz, 30 watts
FACILITIES AND FEATURES
VOLUME CONTROL: Precision "tracked" at all listening
levels. (0 to -65 dB). Does not change stereo balance as
loudness is changed. The AC power ON/OFF switch is
coupled with this control.
BALANCE CONTROL: Natural balance at center position,
attenuation of left or right channel by rotating control.
LOUDNESS: Loudness compensated or fat response
Loudness position boosts low frequencies for low level
listening. Operates as a function of volume control position.
Full compensation is obtained at lower volume levels and
flat response is obtained at full volume.
SELECTIVITY: Increases the ability of the tuner to separate
a weak (distant) station from a strong (local) station on
adjacent channels.
MUTING: Suppresses the background noise and hiss nor-
mally heard between FM stations.
TAPE MONITOR: Pushbutton; compares recorded tape with
program source while recording.
MODE: Selects either stereo or mono operation.
PHASE CONTROL: Electronically reverses phase in the left
channel to correct "out of phase" program sources.
MUTING ADJUST: Modifies the noise rejection threshold
on FM
DIAL SCALE INTENSITY: Modifies the brightness of the
illumination of the front panel
WEIGHT: 26 pounds (11.79 kg) net, 38 pounds (17.24 kg)
in shipping carton.
FINISH: Front panel: Anodized gold and black with special
gold/teal panel nomenclature illumination.
CHASSIS: Chrome and black.
MOUNTING: Mclntosh developed professional PANLOC.
MECHANICAL
SIZE: Front panel: 16 inches wide (40.64 cm) by 5-7/16
inches high (13.81 cm); Chassis: 15 inches wide (38.1 cm)
by 13 inches deep (33.02 cm), including PANLOC shelf
and back panel connectors; Knob Clearance: 1½ inches
(3.81 cm) in front of mounting panel.
11

Related product manuals