McIntosh MX136

MX136
Owner’s Manual
McIntosh Laboratory, Inc. 2 Chambers Street Binghamton, New York 13903-2699 Phone: 607-723-3512 FAX: 607-724-0549
A/V Control Center
Manufactured under license from Dolby Laboratories. “Dolby”, “Pro Logic” and the double-D symbol are trademarks of Dolby Laboratories.
Manufactured under license under U.S. Patent No’s: 5,451,942; 5,956,674; 5,974,380; 5,978,762; 6,226,616; 6,487,535 & other U.S. and
worldwide patents issued & pending. DTS, DTS Digital Surround and Neo:6 are registered trademarks and the DTS logos and Symbol, and
DTS 96/24 are trademarks of DTS, Inc. © 1996-2007 DTS, Inc. All Rights Reserved.

McIntosh MX136 Specifications

General

Channels	7.1
Audio Inputs	8
Total Harmonic Distortion	0.005%
S/N below rated output	100 dB
Type	AV Controller
Audio Outputs	7.1
Video Inputs	3
Dimensions	17.5 x 17.5 inches
Input Impedance	47 kΩ
Maximum Output Voltage	8V
Voltage Gain	0 dB
Frequency Response	20 Hz - 20 kHz (+0, -0.5 dB)

Summary

Safety Instructions

General Safety Instructions

Essential safety precautions and warnings for operating the equipment.

Important Information & Specifications

Important Information

Key details and notes before operating or connecting the MX136 A/V Control Center.

Connector Information

Detailed layout and pin configurations for various connectors like RJ-45, DB25, XLR, and data/power ports.

Introduction and Performance Features

Overview of the MX136 and its key performance capabilities in a home theater system.

Dimensions

Provides front, rear, and side view dimensions for cabinet placement and integration.

Installation and Connections

Installation Guidelines

Instructions for placing the MX136 on a table or custom installing it in furniture.

Rear Panel Connections

Details input/output ports for audio, video, control, and data on the rear panel.

Connecting Components

Guides on connecting various audio, video, data, and power control components.

Operation

Front Panel Operation

Explains front panel controls, buttons, switches, and displays for operating the MX136.

Remote Control Operation

Guides on using the remote control for system operation and component control.

Setup and Configuration

Step-by-step instructions for configuring settings like speaker levels, inputs, volume, and advanced options.

System Operation Modes

Details how to operate the MX136, including trim modes, surround modes, recording, and Zone B.

TM1 AMFM Tuner Module

TM1 Overview and Connections

Introduction to the tuner module, its features, and antenna connection procedures.

Tuner Operation and Specifications

Guides on tuning stations, assigning presets, optimizing reception, and tuner specifications.

Packing Instructions

Packing Instructions

Detailed steps for correctly repacking the equipment for shipping to prevent damage.