Need help?Do you have a question about the McIntosh MX130 and is the answer not in the manual?
General| Channels | 2 |
|---|---|
| Frequency Response | 20 Hz to 20 kHz |
| Total Harmonic Distortion | 0.005% |
| Type | Preamplifier |
| Outputs | Tape1, Tape2, Video1, Video2, Video3 |
| Weight | 25 lbs |
| Input Sensitivity | 2.5mV (MM), 250mV (line) |
| Signal to Noise Ratio | 100 dB |
| Dimensions | 17.5 x 5.75 x 15.5 inches (44.5 x 14.6 x 39.4 cm) |
Warning against using the polarized plug with extension cords or outlets that don't allow full insertion.
Explains Dolby Pro Logic decoding into Left, Center, Right, and Surround channels for home theater audio.
Describes Home THX Audio's additional processing for spatially expanded surround signals.
Details Cinema 1 (Dolby Pro Logic) and Cinema 2 (Home THX Audio) modes.
Covers Listen selection, Volume, Muting, Loudness, and Balance controls.
Details System Calibration (SYS CAL) and Surround Level adjustments.
Controls muting, surround processing, and adjusts surround/volume levels.
Connects to MC7106 amp, surround, center, and subwoofer outputs.
Covers Ant/Cable, TV, AC outlets, Power Control, and Surround Calibrate.
Discusses ideal placement and configuration of loudspeakers for home theater.
Details manual calibration of surround sound levels for Cinema 1 mode.
Explains automatic calibration of surround sound levels for Cinema 1 mode.
Introduces the calibration process for Home THX Audio in Cinema 2 mode.
To Next Page
