Need help?Do you have a question about the McIntosh MX121 and is the answer not in the manual?
General| Total Harmonic Distortion | 0.005% |
|---|---|
| HDMI Version | 1.4a |
| Component Video Inputs | 3 |
| Component Video Outputs | 1 |
| Composite Video Outputs | 1 |
| Power Output | Not applicable (preamplifier) |
| Frequency Response | 20Hz-20kHz ±0.5dB |
| Video Inputs | HDMI, Component, Composite |
| Audio Inputs | Analog, Digital |
| Digital Audio Inputs | 4 (2 Coaxial, 2 Optical) |
| Digital Audio Outputs | 1 (Optical) |
Pin configuration for balanced output connectors on the MX121.
Details on trigger output jacks for controlling other components.
Description of remote control signal connections for source components.
Information on connecting external IR receivers to the MX121.
Wiring diagrams for straight-thru and crossover Ethernet cables.
Guidance on preparing for and performing automated speaker calibration.
How to review and verify Audyssey auto-setup results.
Configuring network connections, DHCP, and IP addresses.
Configuring output signals for controlling other components.
Adjusting display, volume, and naming options.
Customizing input labels for easier identification.
Reassigning audio outputs for bi-amping or zone use.
Manually configuring speaker settings for optimal sound.
Adjusting video parameters like contrast, brightness, and color.
Disabling the front panel IR receiver.
Setting volume levels for individual input sources.
Configuring analog subwoofer levels and Audyssey display settings.
Manually adjusting speaker equalization curves.
Adjusting surround sound processing modes like HT-EQ and DRC.
Basic operation of turning the unit on and off.
Choosing the audio/video source.
Adjusting the listening volume.
Understanding the front panel LEDs for signal status.
Indicates the type of incoming audio signal.
Shows active audio processing modes.
Displays selected surround mode and active channels.
Using directional buttons to move through menus.
Bypassing processing for pure audio playback.
Selecting desired surround sound processing.
Controlling secondary listening zones.
Correcting lip sync issues between audio and video.
Improving sound quality for compressed audio.
Selecting audio input connection types.
Quickly selecting input sources via the screen.
Adjusting volume levels for individual channels.
Accessing and playing media from network devices.
Operating Zones 2 and 3 using the remote.
Fine-tuning audio with Audyssey features.
Adjusting Audyssey Dynamic EQ's reference level for various content.
Connecting and playing music from an iPod.
Streaming audio from Apple devices using AirPlay.
Streaming music from internet radio stations.
Setting up and using Pandora internet radio service.
Setting up and using Last.fm music service.
Viewing photos shared on Flickr.
Steps to reset the unit's internal processors.
Procedure for installing firmware updates.
To Next Page
