McQuay RoofPak RDS 800C - Adjusting Scroll Dampers; Adjusting Supply Fan Thrust Restraints

Page 54 / IM 178
Control parameter record (cont’d)
MENU MENU NAME MENU ITEM =
FINAL
SETTING
27 Optimal Start Opt Start = On ___________
Off
Auto Update =Yes ___________
No
Ht Rate = ____ °F/Min ___________
Heat OAT = ____ °F ___________
Ht Factor = ____ Min ___________
Cl Rate = ____ °F/Min ___________
Cool OAT = ____ °F ___________
Cl Factor = ____ Min ___________
28 Service Mode = Normal ___________
Shutdown
Timers = Normal ___________
Fast
Space Sensor = No ___________
Yes
OAT = Local ___________
Remote
➀ Duct
Sensor 2 = No ___________
Yes
Alarm Out = Blink ___________
Off
Port A Baud = 1200 ___________
2400
9600
19200
IDENT = ____ ___________
➀ This item applys to programs ART1 and ART3 only. The default is factory set depending on the number of duct static pressure sensors
installed.
Normal
Normal
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com