Need help?Do you have a question about the MCS 6710 and is the answer not in the manual?
Explains the automatic functions including start, return, stop, and multi-play capabilities.
Details the electronic system for changing turntable speeds, ensuring precision.
Describes the 6% fine-tuning capability for precise turntable platter speed adjustment.
How to use the illuminated strobe markings for accurate speed verification.
Guidance on setting the bias control to counteract side thrust for optimal tracking.
Explains the cueing lever's function for gentle, controlled stylus descent.
Details the dust cover's function in protecting records and preventing cartridge bounce.
Covers electrical safety, handling precautions, child safety, and proper unit placement.
Lists all parts included with the turntable unit for initial verification.
Step-by-step guide for installing the turntable platter, belt, and mat.
Instructions for attaching the balance weight to the tonearm for proper calibration.
Procedure for achieving tonearm horizontal balance and setting stylus tracking force.
Detailed steps for playing a single record using manual controls.
Guide to initiating playback using the automatic start and stop functions.
How to set the program knob for continuous or repeated playback of one record.
Procedure for setting the correct vertical clearance for the tonearm lift.
How to calibrate the tonearm's starting point on the record surface.
How to adjust the tonearm's auto-return timing and position.
Using the pitch control and strobe dots to set the correct turntable speed.
Essential cleaning methods for stylus and records to maintain sound quality.
Addresses hum, acoustic feedback, and automatic mechanism operational problems.
Step-by-step instructions for safely removing and installing a new stylus.
General| Output | RCA |
|---|---|
| Power Supply | AC 120V, 60Hz |
| Speeds | 33 1/3, 45 RPM |
| Tonearm | Static Balance S-Type |
| Platter Material | Aluminum |
To Next Page