SAFETY REGULATIONS / Installation Requirements
15
Before installation, check that the electrical system is earthed. The power socket must be
installed near the appliance in an easily accessible position.
RCH S.p.A. declines all liability for and the warranty will be void in the case of negligence when
using the product or failure on the part of the operator to comply with the operating instructions.
►
Do NOT use the product in extremely cold/hot places or in direct sunlight for a long time.
Correct operation is expected with temperatures between 0 and 35 °C
►
Do NOT expose the ECR to atmospheric agents
►
Do NOT allow contact with any liquid
►
Do NOT use the ECR in dusty environments
►
Do NOT touch the printer head
►
Do NOT touch the cutter blade
►
Do NOT use a power supply unit other than the one provided
►
Do NOT excessively bend the power cable or place heavy objects on top of it
►
Do NOT remove the power supply by simply pulling on the cable
►
Do NOT allow any maintenance or repair work to be carried out on the product by unauthorised
personnel
►
Do NOT use cleaning detergents on the product that contain alcohol
4
SAFETY REGULATIONS
ABOX 3 must only be installed by technical personnel authorised by RCH S.p.A.
d
No MISUSE/PROHIBITED USE/REASONABLY FORESEEABLE MISUSE of the
product is permitted, in particular:
4.1 INSTALLATION REQUIREMENTS
4.2 IMPROPER / PROHIBITED USE
To Next Page
Loading...