SAFETY REGULATION / Manufacturer’s Liability
16
Install the ECR on a flat, stable surface with no vibrations.
ABOX 3 is equipped with a thermal printer. It is mandatory to use approved thermal paper showing
both the homologation details and the expiry date.
The user must store the documents in accordance with the law, in dark places, with relative
humidity below 80% and temperature below 35 °C, avoiding direct contact with plastic materials
and in particular with polyvinyl chloride.
l
Disconnect the product from the power supply if it is not going to be used for a
prolonged period of time.
a
Batteries may only be replaced by technical personnel authorised by RCH S.p.a.
The ECR must be periodically overhauled in accordance with the regulations in
force in the country of use.
4.3 WARNINGS FOR USE
To Next Page
Loading...