MCT ABOX 3 - THERMAL HEAD CLEANING

To Next Page

To Previous Page

MAINTENANCE / Ordinary Maintenance

ABOX 3 – User Manual

THERMAL HEAD CLEANING

To perform proper cleaning of the thermal head, the following material is required:

►

Compressed air can;

►

Wipes soaked in a solution composed of 70/75% Isopropyl Alcohol.

The user must:

►

Turn the ECR off and wait for the thermal head to cool down (about 30 seconds);

►

Push the cover button all the way in (1) to open the cover and remove the paper roll (2);