Check hitch bolts to 76Nm. Lubricate with high temp bearing grease
Inspect and adjust handbrake
Inspect and adjust brakes
Inspect condition and torque to 125Nm (12mm studs)
(140Nm 14mm studs alloy rims) (200Nm 14mm studs steel rims)
Inspect for abnormal wear, damage and correct pressure
6 MONTHS / 5,000KM SERVICE
Check hitch bolts to 76Nm
Check cable and adjust if necessary
Check brake function and webbing
Lubricate and check bushes for excess movement. Torque bolts to 190Nm
Inspect and adjust. Check lining thickness and drum wear
Remove, clean and re-lubricate. Inspect for wear and replace if necessary
Inspect condition and torque to 125Nm (12mm studs)
(140Nm 14mm studs alloy rims), (200Nm 14mm studs steel rims)
Inspect for abnormal wear, damage and correct pressure
Check all lights are functioning
Check terminals and voltage at full charge
Check condition and correct latch/lock adjustment for correct 30-50% compression
Check all structural fixing are secure.
To Next Page
Loading...
