Measurement Computing USB-1208LS - User Manual

Measurement Computing USB-1208LS Specifications

General

Analog Input Resolution	12 bits
Analog Input Range	±10 V
Digital I/O Channels	8
Counter/Timer Channels	1
Interface	USB
USB Type	USB 2.0
Analog Input Channels	8
Operating Temperature	0 °C to 70 °C
Operating System Compatibility	Windows

Summary

Introducing the USB-1208 LS

Installing the USB-1208 LS

Installing the software

Guides on installing the Measurement Computing Data Acquisition Software.

Installing the hardware

Details connecting the USB-1208LS to the computer and driver installation.

Functional Details

Theory of operation - analog input acquisition modes

Explains software paced, continuous scan, and burst scan analog input modes.

External components

Identifies and describes the USB connector, LED, and screw terminals.

Screw terminal wiring

Analog input terminals (CH0 IN - CH7 IN)

Digital I;O terminals (Port A0 to A7, and Port B0 to B7)

Power terminals

Accuracy

USB-1208 LS channel gain queue feature

Specifications

Analog input

Details specifications for A/D converter, input ranges, voltage limits, and throughput.

Analog output

Provides specifications for D/A converter, resolution, output range, and slew rate.

Digital input;output

Lists specifications for digital type, I/O count, configuration, and voltage levels.

External trigger

Details specifications for trigger source, mode, latency, and input voltage requirements.

Counter

Specifies counter type, resolution, input source, and frequency limits.

Power

Details supply current, USB power availability, and output current ratings.