EasyManuals Logo

Measurement Computing USB-1208LS User Manual

Measurement Computing USB-1208LS
31 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #11 background imageLoading...
Page #11 background image
Chapter 2
Installing the USB-1208LS
What comes with your USB-1208LS shipment?
As you unpack your USB-1208LS, verify that the following components are included.
Hardware
! USB-1208LS
! USB cable (2 meter length)
Additional documentation
In addition to this hardware user's guide, you should also receive the Quick Start Guide (available in PDF at
www.mccdaq.com/PDFmanuals/DAQ-Software-Quick-Start.pdf). This booklet supplies a brief description of
the software you received with your USB-1208LS and information regarding installation of that software.
Please read this booklet completely before installing any software or hardware.
Unpacking the USB-1208LS
As with any electronic device, you should take care while handling to avoid damage from static
electricity. Before removing the USB-1208LS from its packaging, ground yourself using a wrist strap or by
simply touching the computer chassis or other grounded object to eliminate any stored static charge.
If any components are missing or damaged, notify Measurement Computing Corporation immediately by
phone, fax, or e-mail:
! Phone: 508-946-5100 and follow the instructions for reaching Tech Support.
! Fax: 508-946-9500 to the attention of Tech Support
! Email: techsupport@mccdaq.com
2-1

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Measurement Computing USB-1208LS and is the answer not in the manual?

Measurement Computing USB-1208LS Specifications

General IconGeneral
BrandMeasurement Computing
ModelUSB-1208LS
CategoryI/O Systems
LanguageEnglish

Related product manuals