Need help?Do you have a question about the Measurement Computing USB-1608G and is the answer not in the manual?
General| Resolution | 16 bits |
|---|---|
| Input Voltage Range | ±10 V |
| Digital I/O Channels | 8 |
| Counter Channels | 1 |
| Counter Resolution | 32 bits |
| USB Interface | USB 2.0 |
| Operating Temperature Range | 0 °C to 50 °C |
| External Trigger | Yes |
| Operating System Compatibility | Windows, Linux |
| Power Supply | USB powered |
| Sampling Rate | 500 kS/s (aggregate) |
Overview of the guide's content and purpose.
Explains formatting and notation used throughout the manual.
Lists resources for additional help and documentation.
Illustrates the internal architecture and signal flow of the USB-1608G device.
Instructions for safely handling and unpacking the device.
Steps for installing necessary software and drivers for the device.
Guide on connecting the USB-1608G to your computer.
Information on device calibration procedures.
Instructions and resources for updating device firmware.
Details on software-paced and hardware-paced analog data acquisition.
Explanation of burst mode for precise timing in sampling.
Physical connectors, LEDs, and screw terminals on the device.
Guide to connecting analog and digital signals to the device.
Information on external clock input and output for analog inputs.
Configuration and use of digital input/output channels.
Details on using the external trigger input for data acquisition.
Information on the 32-bit event counter inputs.
Description of the PWM timer output functionality.
Details on the +5V power output terminal.
Explanation of analog and digital ground connections.
Technical specifications for analog input channels.
Detailed DC accuracy components and performance for analog inputs.
Specifications for noise levels in analog measurements.
Performance data on settling times for analog input channels.
Parameters for analog input calibration, including interval and reference.
Technical details for digital I/O capabilities.
Specifications for the external trigger input functionality.
Technical data for external clock I/O.
Performance specifications for counter inputs.
Technical details for the timer output.
Information on data FIFO and non-volatile memory.
Details on power supply current and +5V output.
Technical data related to USB connectivity and compatibility.
Operating temperature, storage, and humidity limits.
Device dimensions and connection length.
Specifications for the screw terminal connector type and wire gauge.
Pin assignments for differential analog input mode.
Pin assignments for single-ended analog input mode.
To Next Page