EasyManuals Logo

Mec 69 Series User Manual

Default Icon
40 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #20 background imageLoading...
Page #20 background image
Page 17 69 Series - Operator’s Manual
February 2019Section 6 - Function Tests
Press and hold the lift function enable button. Press and hold the platform down button.
Result: The platform should lower the descent alarm should sound while the platform is
lowering.
Note:Be sure the area below the platform is clear of personnel and obstructions before continuing.
Test the Auxiliary Lowering
Activate the up function and raise the platform approximately 3 feet (1 m).
Pull the emergency lowering knob located the entry ladder end.
Result: The platform should lower. The descent alarm will not sound.
Restart the engine.
Test the Emergency Lowering
Activate the up function and raise the platform approximately 3 feet (1 m).
Push in the red Emergency Stop button to shut off the engine.
Turn the ground red Emergency Stop button clockwise to the on position.
Press and hold the emergency lowering down enable button. Press and hold the emergency
lowering down button.
Result: The platform should lower.
Turn the key switch to platform control and restart the engine.
At the Platform Controls
Test Emergency Stop
Push in the platform red Emergency Stop button to the off position.
Result: No functions should operate.
Pull the red Emergency Stop button out to the on position.
Result: The LED indicator light should come on.
Test the Horn
Push the horn button.
Result: The horn should sound.
Test Up/Down Functions and Function Enable
Start the engine.
Do not hold the function enable switch on the control handle.
Slowly pull the control handle in the upwards direction, then push in the downwards direction.
Result: No functions should operate.
Press the lift function select button. The indicator light should turn on.
Press and hold the function enable switch on the control handle.
Slowly move the control handle in the upwards direction.
Result: The platform should raise.
Release the control handle.
Result: The platform should stop raising.
Press and hold the function enable switch. Slowly push the control handle in the downwards
direction.
Result: The platform should lower. The descent alarm should sound while the platform is
lowering.
3.
1.
2.
3.
1.
2.
3.
4.
5.
1.
2.
1.
1.
2.
3.
4.
5.
6.
7.
8.

Other manuals for Mec 69 Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Mec 69 Series and is the answer not in the manual?

Mec 69 Series Specifications

General IconGeneral
BrandMec
Model69 Series
CategoryScissor Lifts
LanguageEnglish

Related product manuals