Page 4 69 Series - Operator’s Manual
February 2019
Safety Rules
Failure to obey the instructions and safety rules in this manual will result
in death or serious injury.
Do Not Operate Unless:
You learn and practice the principles of safe machine operation contained in this operator’s
manual.
Avoid hazardous situations.
Know and understand the safety rules before going on to the next section.
Always perform a pre-operation inspection.
Always perform function tests prior to use.
Inspect the workplace.
Only use the machine as it was intended.
You read, understand and obey the manufacturer’s instructions and safety rules— safety and
operator’s manuals and machine decals.
You read, understand and obey employer’s safety rules and worksite regulations.
You read, understand and obey all applicable governmental regulations.
You are properly trained to safely operate the machine.
Intended Use
This machine is intended to be used only to lift personnel, along with their tools and materials to an
aerial work site.
Safety Sign Maintenance
Replace any missing or damaged safety signs. Keep operator safety in mind at all times. Use mild
soap and water to clean safety signs. Do not use solvent-based cleaners because they may damage
the safety sign material.
1.
•
•
•
•
•
•
2.
3.
4.
5.
Section 3 - Safety Rules and Hazards
Safety Rules
To Next Page
Loading...
Need help?
General
