Page 32 Micro19 - Operator’s Manual
August 2021Section 9 - Maintenance
Maintenance Inspection Report
SE & MICRO Series Scissors
Fleet Equipment Number Date
Inspector Name Inspector Co.
Model Number Address
Serial Number
Hour Meter Signature
Machine Owner & address
Maintain all service records in accordance with ANSI A92.24-2019
*If an inspection receives an “N”, remove from service. Once repaired, place an R in the box.
*Refer to the proper service manual for specific information, settings and torque specifications.
Key Y = Yes, Acceptable N = No, Remove from Service R = Repaired 0 = Not Applicable
QUARTERLY - Inspect only those marked “Q” ANNUAL - Inspect all items
Q/A Y/N/O R Q/A Y/N/O R
DECALS: WHEELS:
Legible - undamaged/readable Q Tire damage Q
Capacity decal correct for model Q Lug nuts (Wheel mounting) torqued correctly Q
RAILS: King Pins lubed A
Not damaged, all in place Q COMPONENT AREA:
All rail fasteners secure Q Hydraulic - no leaks Q
Entry gate secure, closes properly Q Hydraulic tank, correct level Q
Manual box in good condition Q Hoses not damaged - Fittings tight Q
Operators Manual in manual box Q Valve manifold secure, no leaks Q
PLATFORM EXTENSION: Power unit secure, no leaks Q
Rolls in and out freely Q Batteries properly filled and cables clean Q
Lock holds deck in place Q Emergency stop, cuts power/operation Q
Release pedal moves freely (lube) Q Battery switch cuts battery feed Q
ELEVATING ASSEMBLY: Plastic cover secure (door end 2632-4555 only) A
Scissor Slide Blocks, lubed Q Hydraulic tank, oil clean A
Maintenance Stand, good Cond Q Replace Hydraulic Filter (if equipped) A
Beam structures: Straight, no cracks A Clean or replace tank breather filter A
Welds: secure, no cracks A OPERATIONAL INSPECTION:
Retaining Rings A All functions, operate smooth and quiet Q
Cylinder Pins, secure A All functions, speeds correct. Q
ELECTRICAL: Upper control box, operates correctly Q
GFCI operates correctly Q Emergency Down, operates correctly Q
Wire harnesses good cond, secure A Limit switches slows drive when elevated Q
Comm cable no damage, secure A Pothole switch test Q
BASE: Steering pressure relief, set correctly Q
Fasteners tight Q Lift pressure relief, set correctly Q
Cover panels secure Q
Welds A
To Next Page
Loading...
