Page 31 Mast Series - Operator’s Manual
April 2021
Maintenance Safety
Make sure the chock is in place during maintenance!
When the work platform of a Mast Series needs to be raised for routine
servicing purposes, a captive chock shall be used to enable the
extending structure to be held in the required position to prevent the
work platform from falling!
NEVER perform work or inspection on the machine with the platform elevated without first supporting
the platform with either a forklift or a crane. Alternatively, use a 2”×4” or recommended a 4”×4” piece
of wood to support the mast section that is attached to the platform.
Section 10 - Maintenance
Maintenance Safety
To Next Page
Loading...
