Need help?Do you have a question about the Mec 65-J and is the answer not in the manual?
General| Brand | Mec |
|---|---|
| Model | 65-J |
| Category | Lifting Systems |
| Language | English |
This Operator's Manual has been designed to provide you, the owner, user or operator...
Overview of critical safety precautions and requirements before operating the machine.
MEC manuals and decals use symbols, colors and signal words to help you recognize important safety, operation and maintenance information.
Provides detailed technical specifications for the MEC 65-J Diesel aerial work platform.
Highlights electrocution risks due to the machine not being insulated and the need for clearance from charged conductors.
Diagrams and guidelines for maintaining safe distances from energized electrical conductors based on voltage.
Details hazards related to overloading, slopes, uneven terrain, and wind to prevent tip-overs.
Addresses risks of falling from the platform and colliding with objects or personnel.
Covers explosion, fire, damage, bodily injury, welding, and battery-related safety hazards.
Diagram identifying key machine components such as platform, boom, engine, controls, and chassis.
Details controls found on the platform, including start/stop, emergency stop, and function selection switches.
Explains controls on the base panel, including hour meter, selector switch, start/stop, and indicator lights.
Procedure to assess workplace suitability and identify potential hazards before operating the machine.
Instructions and tests for all machine functions, emphasizing pre-operation checks and safety rules.
Steps for operating controls and testing functions from the base station, including safety checks.
Details the meaning and function of various indicator lights and alarms on the machine.
Guidelines for safely entering the platform and requirements for personal fall protection equipment (PFPE).
Description of the platform control panel layout and how to use its functions, including the Function Enable trigger.
Procedures for testing platform operations, including emergency stop, engine start, and indicator lights.
How to operate drive and steer functions using the control lever, including speed, direction, and steering wheel position.
Instructions on selecting engine speed and operating boom functions via control levers.
How to operate platform rotation and jib lift/lower functions using the control lever.
Steps for safely shutting down the machine, including parking, key removal, and exiting the platform.
How to use the auxiliary power system to safely lower the platform during primary power failure.
General guidelines for performing machine inspections and maintenance, focusing on safety and best practices.
Procedure for safely supporting the boom assembly when performing work underneath it.
A comprehensive checklist of items to inspect before starting the machine each work shift.
Checklist for frequent inspections (3-month intervals or 150 hours) conducted by qualified service technicians.
Form for documenting annual inspections, covering various machine components and systems.
Defines operator's responsibility for routine maintenance versus technician's role for frequent/annual maintenance.
Details lubrication points, fluid types, and frequencies for scheduled maintenance.
Provides steps to diagnose and resolve common machine operational issues and error codes.
Ensures all warning and instructional decals are present, legible, and secure on the machine.
Describes the location and content of the machine's serial plate for identification and reference.
Safety information and procedures for loading, transporting, and lifting the aerial work platform.
Instructions for qualified riggers on safely lifting the machine, including crane capacity and rigging points.
To Next Page
