Mec 65-J - Indicator Lights and Alarms

Page 23 65-J Diesel - Operator’s Manual
September 2022Section 7 - Operating Instructions & Pre-Operation Function Tests
Tilt Indicator Light
STOP ALL MOVEMENT if Tilt Alarm sounds.
ART_3337b
Light ON and alarm sounding indicates an unsafe condition.
• STOP ALL MOVEMENT. The machine is not level.
• Look at the diagram to determine the condition of the counterweight as it
relates to the slope, then use extreme caution while following the instructions.
DO NOT rotate the turntable while lowering.
ART_4753
COUNTERWEIGHT
DOWNHILL:
1-- Lower Boom
2-- Retract Boom
COUNTERWEIGHT UPHILL:
1-- Retract Boom
2-- Lower Boom
• If the Tilt Alarm sounds while the counterweight is uphill, rst retract the boom,
then lower the boom.
• If the Tilt Alarm sounds while the counterweight is downhill, rst lower the
boom, then retract the boom.
• Move the machine to a rm, level surface before continuing operation.
Overload Light and Alarm
ART_3528
Light ON indicates too much weight on the platform.
An audible alarm will sound and all machine function will stop.
Remove weight from the platform to restore function and continue.
Water-Fuel Separator Light
ART_5658
Indicates if water has contaminated fuel.
Drain fuel and replace.