EasyManua.ls Logo

Mec MME20 - Frequent Inspection Checklist

Default Icon
44 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Page 33 Mast Series - Operator’s Manual
April 2021Section 10 - Maintenance
Frequent Inspection Checklist
This checklist must be used at 3-month intervals or every 150 hours of
machine use, whichever occurs first. Failure to do so could result in
death or serious injury.
Frequent Maintenance Inspections should be conducted by qualified service technicians only.
Photocopy this page for reuse. Keep inspections records up to date. Record and report all
discrepancies to your supervisor. See the Service & Parts Manual for specific instructions.
Model Number Serial Number Hour Meter Reading
Initial Description
Perform all checks listed on Pre-Start Inspection.
Grease the Steering Yokes
Inspect the condition of hydraulic fluid in the reservoir. Oil should be a clear and amber in color.
Batteries
Electrical wiring
Tires and wheels
Emergency stop
Key switch
Horn (if equipped)
Drive brakes
Drive speed - Raised
Additional maintenance requirements for severe conditions
Check around the hydraulic tank for oil; oil that has collected around the hydraulic tank may indicate a
leak.
Date Inspected By

Other manuals for Mec MME20

Related product manuals