mectron Easyjet Pro - User Manual

Questions and Answers

P
patelvanessaAug 9, 2025
Why is the treatment with my mectron Easyjet Pro Dental equipment ineffective?
- M
  Michael ClarkAug 10, 2025
  If the treatment with your Mectron Dental equipment is ineffective, several factors could be at play. First, check the pressure in the air circuit of the dental unit, as insufficient pressure can hinder performance. Also, ensure the powder level inside the container is correct; if it's too low or too high, adjust it. Verify that you are using Mectron-produced powder, as unsuitable powder can cause issues. Lastly, a clogged front terminal due to moisture or inadequate cleaning can be the culprit; in this case, remove the powder, clean the container with a dry cloth, and refer to the manual for detailed cleaning instructions.
M
moorestephenAug 14, 2025
How to fix powder leakage from the mectron Easyjet Pro Dental equipment container cap?
- J
  Justin ConwayAug 15, 2025
  To resolve powder leakage from the container cap of your Mectron Dental equipment, ensure the cap is screwed on correctly. If the issue persists, check for powder residues in the thread and clean them.
B
Betty AdkinsAug 19, 2025
What type of powder is suitable for mectron Easyjet Pro?
- M
  Meghan EstradaAug 19, 2025
  To ensure correct operation of your Mectron Dental equipment, use only powder produced by Mectron.
M
michaelsalasAug 25, 2025
What to do if the Mectron Dental unit is not connected to the air circuit?
- A
  Angelica CurtisAug 25, 2025
  Check the connection between the dental unit and the air circuit to ensure your Mectron Dental equipment functions correctly.
V
vriosAug 29, 2025
What to do if the Mectron Dental unit is not connected to the water circuit?
- L
  Larry DorseyAug 29, 2025
  Check the connection between the dental unit and the water circuit.
M
Megan WrightSep 3, 2025
What to do if Easyjet pro of Mectron Dental equipment is pressurised?
- G
  Gabrielle NicholsSep 3, 2025
  Disconnect the Easyjet pro from the turbine to depressurize the internal circuit.