MEDCAPTAIN SYS-6010 - System Introduction; Introduction; The Composition of the Infusion Pump

4
2 System Introduction
2.1 Introduction
2.1.1 Purpose
This product is intended for hospitals to infuse liquid at constant speed or liquid medicine
continuously through the veins of patients.
2.1.2 Product Features
MEDCAPTAIN SYS-6010 is a micro-continuous infusion pump. It ensures constant
infusion speed and accurate dosing volume during long time infusion.
 Support all disposable IV sets conform to the standard.
 You can customize other IV sets conform to the standard.
 Three occlusion levels can be selected from three levels. The pressure status of
tubing also display.
 The maximum infusion rate can be set to 1200mL /h
 Calibration function for infusion accuracy
 Safety design by monitoring infusion status.
 Multiple modes of infusion
 Multi-channel IV delivery system, realizing relay infusion function
 Touch screen, providing quick and convenient man-machine interface.
 Display night mode, reducing light interference to patients and environment.
 Connection to bar code scanner function.
 Providing three types of power supply: AC power supply, DC power supply, and
internal lithium battery. The lithium battery can power the infusion pump for no less
than 5 hours (when infusion is run at 25mL/h).
 Double CPU and redundancy design for key units.
 Two-way alarm for monitoring the main control circuit and motor drive circuit at any
time.
 Independent motor driving CPU and motor subdivided drive chip design.
 Setting and automatic prompt of maintenance interval.
 Modular installation design enables multi-channel pumps among pumps.
 Handle, pole clamp, bar code scanner, relay infusion function are optional,
depending on the user’s need.
2.2 The Composition of the Infusion Pump
The SYS-6010 infusion pump mainly consists of the pump shell, display and operating
system, monitoring system, alarm system, motor drive system, tubing peristaltic module,
power supply system, drop sensor, the handle (optional), and pole clamp (optional).
The infusion pump adopts dual processor structure, controls the motor precisely,
System Introduction