13
Other Function
Function Menu
Octave
Press [FUNCTION] button to enter the menu of functions. The default
option of the menu is "Transpose". When you enter the menu next
time, you will find the option is the same as last time. Press
[FUNCTION] button repeatedly, select the option to be set. Use [+]/[-]
button to set the parameter.
The option and the parameters are as the follows:
Content
Transpose
Octave
Modulation
Beat
Tune
MIDI Receive
MIDI Transmit
Automatic Shutdown
LCD Display
XXX Transpose
XXX Octave
Modul
XX Beat
XXX Tune
XXX Midi in In
XXX Midi out
XXX PowerOff
Range
-12~+12
-1~+1
ON/OFF
0, 2…9
-50…50
01-16, ALL
Out 01—16
30, 60, OFF
Note:
If you don't press any button for 3 seconds after entering FUNCTION
menu, it will quit automatically.
TRANSPOSE
Press the [FUNCTION] button to set the transpose. The LCD displays
the current transpose value "xxx Transpos". Use [+]/[-] button to select
the transpose value. This function can set from –12 to +12.
Press [+] and [-] buttons simultaneously to set its default value "0".
OCTAVE
Press the [FUNCTION] button to set the octave. The LCD displays the
current octave value "xxx Octave". Use [+]/[-] button to select the
octave value. This function can change the keyboard from –1 to +1
octaves.
Press [+] and [-] buttons simultaneously to set its default value.
MODULATION
Press the [FUNCTION] button to set the modulation. The LCD
currently display "Modul". Use [+]/[-] button to set
modulation ON/ OFF.
Note: This modulation effect is unavailable to percussion.
BEAT
Press the [FUNCTION] button to set the beat function, LCD displays
"xxx Beat". Press the [+] or [-] button to change the beat value: 0 2 3 4
5 6 7 8 9. The default value is 4.
Transpos
Octave
Modul
Beat