The DSP effect is the sound localization technology for simulating the
sounds in the real environment. With DSP effect, you can add
ambience and depth to your music in a variety of ways. There are 5
reverb effects, 5 chorus effects, 5 EQ effects built into this instrument.
Reverb
Press and hold the [SHITF] button, then press the key marked
ON/OFF in the REVERB section to turn reverb effect on/off. Tap the
key marked REVER +/- which are next to the ON/OFF to select the
desired reverb type.
The default reverb effect setting is: turn on, and reverb type is: 2 Hall.
Chorus
Press and hold the [SHITF] button, then press the key marked
ON/OFF in the CHORUS section to turn chorus effect on/off. Tap the
key marked CHORUS +/- which are next to the ON/OFF to select the
desired chorus type.
The default chorus effect setting is: turn off, and reverb type is: 1
Chorus 1.
DSP Effect
16
Parameter
1
2
3
4
5
Reverb Type
Room
Hall
Church
Delay
Pan Delay
Parameter
1
2
3
4
5
Chorus Type
Chorus 1
Chorus 2
Chorus 3
Flanger
Rotary
EQ
EQ function can control the gain of different frequency band. And
different gain settings can make different sound field effects.
Press and hold the [SHIFT] button, then press the key marked EQ +/-
to select the desired EQ type.
The default EQ type is: 1 Standard.
Parameter
1
2
3
4
5
EQ Type
Standard
Modern
Rock
Classic
Jazz
To Next Page
Loading...
Need help?
General
