5 Specification
Input power
The power information in this section may be helpful if you plan to travel internationally with the
universal dock.
The universal dock operates on DC power, which can be supplied by an AC or a DC power source. The AC
power source must be rated at 100–240 V, 50–60 Hz. Although the universal dock can be powered from a
standalone DC power source, it should be powered only with an AC adapter or a DC power source supplied
and approved by MediaGear for use with this universal dock.
The universal dock can operate on DC power within the following specifications.
Input Power Rating
Operating voltage and current 19 V dc @ 3.42 A – 65W
NOTE: This product is designed for IT power systems in Norway with phase-to-phase voltage not
exceeding 240 V rms.
NOTE: The
universal dock operating voltage and current can be found on the universal dock’s regulatory
label.
Operating environment
Factor Metric U.S.
Temperature, operating (writing to optical
disc)
0°C to 40°C 32°F to 104°F
Temperature, nonoperating -40°C to 60°C -40°F to 140°F
Humidity, operating 10% to 90% 10% to 90%
Humidity, nonoperating 10% to 95% 10% to 95%
19 Chapter 5 Specification
To Next Page
Loading...