47
EN
Menu option Setting
TRAN
SPONDER
Use the arrow button EPG to switch to the TRAN
SPONDER column and use the arrow buttons
to select the transponder for which you
want to start the search. Now press the OK but-
ton to mark the relevant transponder with a red
tick.
ADD
Press the yellow button to add a new transpond-
er. Enter the required values and confirm with OK
or press EXIT to cancel the process.
FREQUEN
CY
Enter the frequency using the num-
ber buttons.
SYMBOL
KS/S
Enter the symbol rate using the
number buttons.
POLARITY
Select the polarity with .
DELETE
Select the transponder that you want to delete
from the list as described above and press the red
button. Confirm the query with JA.
EDIT
The setting options correspond to those for ADD.
SCAN
The setting options correspond to those for
SCAN under Satellite.
LNB TYPE
Enter the oscillator frequency for your LNB type
here. The default setting is 09750/10600.
The following UNICABLE SETTINGS can be
made here.
LNB TYPE You can set the LNB frequency here
IF CHAN
NEL
You can set the IF channel here
CEN
TRE FRE
QUENZ
You can set the centre frequency
here
SAT POS
TION
You can set the satellite position
here
To Next Page
Loading...
