64
13.3.8. PROGRAM (track playing order)
You can use the programming function to play up to 16 chapters (DVD) or tracks
(audio) in a sequence defined by you.
Programming is not possible for MP3 media.
Programme the sequence as follows:
Press the red PROGRAM button. A table showing the available programme po-
sitions appears on the screen.
Use the number buttons on the remote control to enter the track you want
in programme position 1. In the case of single-digit numbers, please enter a
preceding 0.
In the case of DVDs, please also enter the desired chapter at this point.
Use the arrow buttons to select the next programme position and select
the next track in the same way.
You can now enter subsequent programme positions in the same way, as required.
Processing a list
As soon as you have finished programming, use the arrow buttons to move the
cursor to PLAY and press OK. The programmed list starts to play. You can display
the list again using the red PROGRAM button.
During playback, press STOP twice to return to normal playback mode. To
delete the list, press PROGRAM, select the option CLEAR underneath and press
OK
13.3.9. A-B (A-B repeat)
You can use A-B repeat to define the start and end of a required scene and repeat it:
Press the blue AB button to specify the start point A for repeating a specific sec-
tion.
Press the blue AB button again to define the end point B. The section between
points A and B is then repeated on a loop.
Press the AB button a third time to disable the A-B repeat function
13.3.10. LANG (audio setting (language))
Press LANG repeatedly to select a different audio setting that is available on the
DVD (for example, 2-channel sound or 5.1-channel sound) or the spoken lan-
guage. The setting is applied immediately and does not need to be confirmed.
Please note that this function is not implemented on some DVDs.
To Next Page
Loading...
