16
Relative cycle counter
The relative cycle is related to the difference between
the set values for the highest and lowest positions (see
“Adjusting the stretcher positions” on p. 14). One cycle
is added when the difference between the highest and
lowest position is reached. The value of this difference
therefore varies according to the current settings of the
limit positions.
The values for recording a cycle are added regardless of
whether the direction of movement changes.
Basic Settings
The application allows you to change the settings of some system functions. Always fill
in all the values of the adjustable functions before pressing the Send button.
Relative cycle counter
Setting the norms
Current date and time
Sending the data
Adjustable system functions
To Next Page
Loading...
