Review/Change Test Setup for Test Type
The options set with the Review/Change Test Setup for Test Type apply
to different tests that may be performed, such as glucose. Use this menu
to review or change these setups for Test Type:
Units:
Display test results in certain measurement units. The options are:
• mg/dL
• mmol/L
Sample Type:
Distinguish between different types of blood samples used for patient
tests. The options are:
• Prompt to select the blood sample type for each patient test.
• Default to Capillary or Arterial for all patient tests.
• Default to Venous for all patient tests.
Action Range:
Set the range (low and high) when action should be taken based on the
patient result obtained. The options are:
• Disable the action range.
• Enable and set the action range.
Questions? Refer to Page 10-13 For Customer Care Information.
8-29
To Next Page
Loading...
