Need help?Do you have a question about the Meech Hyperion 924IPS and is the answer not in the manual?
Highlights the convenience of 24V DC power and an integrated supply for easy installation.
Explains how resistively coupled titanium emitter pins prevent sparking and operator shocks.
Details IP66 rating for mounting in washdown areas and the need to dry if wet.
Describes the function of the local LED indicator for status (on, cleaning, fault).
Explains the output signal for remote monitoring of cleaning needs or fault detection.
Discusses the divider for increased surface tracking distance in dirty environments.
Describes mounting using T-slots and M4 T-bolts for flexible positioning.
Details mounting the bar at a specific distance from the target surface and ensuring clear space.
Emphasizes the requirement for a grounded 24V DC supply and connecting the 0V line to ground.
Illustrates the M8 4-pin connector pin assignments for power and output signals.
Explains connection using a standard Meech switchmode power supply and its features.
Advises checking grounding for customer-supplied 24V power and using a fuse.
Details using the output signal for remote monitoring via PLC or external relays.
Discusses adjusting output frequency based on product and distance for optimal ionisation.
Lists specifications like dimensions, voltage, frequency, and environmental protection.
States compliance with Low Voltage and EMC Directives.
Mentions ozone emission levels being below international standards.
General| Color | Silver |
|---|---|
| Voltage | 24 V DC |
| Current | 0.5 A |
| Power | 12 W |
| Operating Temperature | 0°C to 50°C |
To Next Page
