To Next Page
L
Laura BrownJul 31, 2025
What to do if Meech Hyperion 960IPS have no LED?
- BbrownrobertJul 31, 2025
If the Meech Ion Bars have no LED, check the 24V Power Supply over pins 1 and 3, which are the brown and blue wires.
What to do if Meech Hyperion 960IPS have no LED?
If the Meech Ion Bars have no LED, check the 24V Power Supply over pins 1 and 3, which are the brown and blue wires.
Lists optional accessories for the 960IPS bar, including cables and programmers.
Highlights the use of 24V DC and an integrated supply for easier installation.
Describes titanium emitter pins resistively coupled to avoid sparking and shocks.
Details the IP66 rating, suitable for wash-down environments.
Explains dual alarm lines for remote monitoring of maintenance and faults.
Details recommended mounting distances and secure fixing methods.
Guides on connecting the bar using a grounded 24V DC supply.
Guides on connecting the bar using an ungrounded 24V DC supply.
Details pinouts for the M8 connector and connection to Meech's 24V DC supply.
Describes the function of alarm pins 2 (white) and 4 (black) for cleaning and fault alerts.
Details the NPN transistor-driven switch configuration for alarm pins.
Discusses adjusting the output frequency based on application and distance.
Lists directives and standards related to CE marking for the product.
General