Meech Hyperion 960IPS - Introduction

3
Introduction
The Hyperion 960 IPS is a powerful, compact pulsed DC ionising bar. It is used
to control static electric charges in short to mid-range applications (150-600mm).
An integral 15kV pulsed DC power supply allows for easy installation on printing,
converting and packaging machinery. Requiring only a 24V DC supply, the 960 IPS
removes the need to route high-voltage cabling through the machine.
In most installations the default settings of the bar will provide exceptional static
control. The local LED indicator shows the operational status of the bar and advises
when the bar requires cleaning.
Demanding installations can take advantage of the adjustable output of the 960 IPS.
Using the optional Hyperion BarMaster remote programmer or SmartControl (each
sold separately), the frequency, balance and voltage can be optimised to suit the
application. Additionally, the lon Current alarm setting can be changed to guarantee
the required performance levels on critical processes, and dual alarm lines enable
remote monitoring for system maintenance and faults.
The Hyperion BarMaster remote programmer and SmartControl are available for
purchase from the Meech network: Visit www.meech.com to nd your nearest Meech
o󰀩ce or distributor for further product information.