Meech Hyperion 960IPS - Features and Benefits of Hyperion 960 IPS; Low voltage wiring and Integrated Power Supply; Shockless Emitters; Sealed Construction

5
Features and Benets of Hyperion 960IPS
Low voltage wiring and Integrated Power Supply
The 960IPS is powered by 24V DC via a 4-pin M8 Connector.
Shockless Emitters
The Titanium emitter pins on the 960IPS are resistively coupled to the high voltage
supply. This avoids sparking and operator shocks.
Sealed Construction
IP66 construction allows the bar to be mounted in areas subject to occasional wash-
down or spillage. If the bar does become wet it must be thoroughly dried before being
powered-up.