PARAMETER SETTING:
( The panel function key F5)
It can adjust the feed system delay
time and the frame system delay
time and the vise jaw open time
and the others by password, which
set by manufacturer or agent.
Operator not only can change unit
between mm and inch,but also can
change English operating type to
Chinese operating type if really
necessary.
INPUT MONITOR:
The panel function key F1
10
(PARAMETER SETTING)(FEED SYSTEM DELAY TIME)
(FRAME SYSTEM DELAY
(VISE JAW OPEN TIME)
(COMPENSATION)
(BLADE PARAMETER) (PROGRAM VER)
To Next Page
Loading...