5. MAINTENANCE (全行程)
5.1Oiling and Lubricant
The operator should be responsible for the proper lubrication of the machine. The grade and quality
of lubricant are given in the lubrication chart below :
Oil Lubrication chart
Lubricating Point Lubricant Quantity Oiling Frequency
1.
Transmission
Gear Box
DAPHNE GEAR LUBE 320 3 liter Twice a year
2.
Drive Wheel
Bearing
Grease 40g Thrice a year
3.
Driven Wheel
Bearing
Grease 40g Twice a year
4.
Cutting Fluid
Tank
Cutting Oil Mixture
(KH ULTRA COOL EX-2)
52 liter Daily
5
Hydraulic Oil
Tank
DAPHNE FLUID 32T 64 liter Twice a year
6 Column Housing DAPHNE FLUID 32T few Thrice a year
7
Main Column
Holder
DAPHNE FLUID 32T few Thrice a year
Belt Size
NO. Belt Name Belt Size Qty.
8 Motor Belt
50HZ use 3V530
or 60HZ use 3V500
or Inverter use 3V450
1
9 Wire Brush Belt M41 1
18
To Next Page
Loading...