MegaTec NetAgent Mini User Manual

11
Section2. Install the NetAgent Mini with UPS and Network
NetAgent Mini - External NetAgent Mini -Internal
2.1 For External NetAgent Mini
n Connect the NetAgent Mini to LAN, using the UTP port.
o Connect the cable from NetAgent Mini to the serial port of UPS.
p Plug the DC adapter to UPS outlet, the DC plug connected with NetAgent
Mini.
2.2 For Internal NetAgent Mini
n Please make sure the connector direction of the cable is correct before
connecting to the NetAgent.
o Connect the NetAgent module to LAN, using the UTP port.
Warning: Please make sure the input Voltage and Frequency of the DC power adapter
(NetAgent II – DC 9V / NetAgent Mini – DC 6V or 5.3V) is correct before plug the
power into!
nTo LAN
oTo UPS
pTo
DC Adapter
nTo LAN
oTo UPS

MegaTec NetAgent Mini Specifications

General

Brand	MegaTec
Model	NetAgent Mini
Category	Controller
Language	English