MegaTec NetAgent II - User Manual

NetAgent
UPS SNMP Agent
User’s Manual

MegaTec NetAgent II Specifications

General

Remote Management	Yes
Mounting	Rack-mountable
Type	Network Management Controller
Interface	Ethernet
Power Supply	100-240VAC, 50/60Hz
Operating Temperature	0°C to 40°C
Protocols Supported	SNMP

Summary

Chapter 1. Introduction

Section1. Features

Key capabilities and advantages of the NetAgent monitoring product.

Chapter 3. NetAgent, UPS and Network Connection

Section1. Install the NetAgent II with UPS and Network

Hardware connection steps for NetAgent II with UPS and network.

Section2. Install the NetAgent Mini with UPS and Network

Hardware connection steps for NetAgent Mini with UPS and network.

Chapter 4. Using Netility Setup IP.Update Firmware

Section1. Install Netility

Section2. Using Netility

Launching and using Netility for IP setup and firmware updates.

Chapter 5. UPS Web management by NetAgent

Section2. NetAgent UPS Web Interface

Overview of main sections and navigation within the web interface.

Chapter 6. Telnet (Remote Monitoring)

Chapter 8. SNMPView - Windows Based UPS Management System

Section3. Install SNMPView

Section4. Using SNMPView

Appendix - Update the firmware of NetAgent UPS

1. Click firmware upgrade under About of NetAgent webpage

2. Use FTP to update

3. Use IE browser to update