MegaTec NetAgent II User Manual

58
vi. Shutdown Windows
To configure if shutdown the Windows system when power failure.
vii. When AC failed, commence computer shutdown sequence in xx
Min.
To configure the time delay between the AC failure and the system
shutdown.
viii. When Battery Low, commence computer shutdown sequence in
xx Min.
To configure the time delay between the Battery Low and system shutdown.
ix. Notify Scheduled shutdown before xx Min.
Time before the ‘Schedule Shutdown’ to make notification.
x. Turn Off UPS (For NetAgent Only)
Setting if to turn-off NetAgent UPS AC power after system shutdown.
xi. Turn Off UPS shutdown sequence in xx Sec.
Time delay of turn-off the UPS power.
xii. Auto save application files
Check if to save the application files before system shutdown.
xiii. Run Application before shutdown computer
Execute the application before system shutdown.
2.2 Closed Files
User could review all the files closed during previous shutdown process. If the
“Auto save application files” function has been turn-on in the “Setting” dialog,
the details of the closed application and files could be reviewed here.
Fig.53 ClientMate: Closed Files

MegaTec NetAgent II Specifications

General

Brand	MegaTec
Model	NetAgent II
Category	Controller
Language	English