EasyManua.ls Logo

MegaTec NetAgent II - Data Log

Default Icon
91 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
50
2.3.3 Data Log
This page is a UPS data log. It records UPS Input Voltage/Output Voltage/
Frequency/ Loading/Capacity/ Temperature. When reach to the limit, it
rewrites on the previous logs. Logs can be saved in CSV format by clicking
on “Save Data Log”.
Date/Time
This is a record of the Date (yyyy/mm/dd) and Time (hh:mm:ss) that the data was
recorded. The interval between every log can be set in /Configuration/ UPS
configuration/ UPS recorded/UPS data Log/.
Input Volt.
This section shows records of the UPS Input voltage readings. (Unit: Volt.)
Output Volt.
This section shows records of the UPS Output voltage readings. (Unit: Volt.)
Freq. (Hz)
This section shows records of the UPS Input Frequency. (Unit: Hertz)
Load
This section shows records of the UPS Output loading. (shown as %)
Capacity
This section shows records of the UPS battery capacity. (shown as %)
Temp.
This section shows records of the UPS internal temperature. (unit: degrees
Centigrade)
Env. Temp.
This section shows environmental temperature which detected by NetFeeler Lite
Env. Humidity
This section shows environmental humidity which detected by NetFeeler Lite

Table of Contents

Related product manuals