63
Section4. Using SNMPView
When use SNMP view at the first time, the system will ask for input the user's
name and password. Please enter the default value as follows to start the
SNMPView.
User Name: Admin
Password: <blank> (just press <Enter>)
After the SNMPView program start up the main windows will be displayed.
The left panel will list the available stations by area and the right panel will list
the UPS, Host Name, Startup Time, Manager and Location of UPS found in
each station.
Shows that the device is a UPS
Shows that the UPS is Battery Low
Shows that the UPS is Disconnect / Off-Line
To Next Page
Loading...
Need help?
General
