Megger BM25 - APPENDIX 1; IR Test; PI Test

PI Test
Default test time of 10 minutes. Terminating the test prematurely still
allows the test results to be calculated and displayed.
Note: A capacitance value reading is only available if the test has run for
more than one minute, and provided the reading was not over-range.
APPENDIX 1
26
Results Displayed at end of each test
IR Test
Default test time 30 minutes.
Note: A capacitance value reading is only available if the test has run for
more than one minute, and provided the reading was not over-range.
Timer
Test Duration
Test Duration
Test Duration
Test Duration
Digital Indicator
Blank
R
I
µF
Voltage Indicator
Final test voltage
Final test voltage
Final test voltage
Final test voltage
Timer
T3
Test Duration
T2 time
T3 time
T1 time
T2 time
T3 time
T3 time
Digital Indicator
Blank
PI (T1 to T2)
PI (T2 to T3)
R at T1 time
R at T2 time
R at T3 time
µF
Voltage Indicator
Final test voltage
Voltage at T2 time
Voltage at T3 time
Voltage at T1 time
Voltage at T2 time
Voltage at T3 time
Voltage at T3 time
Other
PI cursor
flashes
PI cursor
flashes