Megger MCT105 - Operation; Cable locator mode

www.megger.com
t
10
Operation
4. Operation
4.1 Cable locator mode
4.1.1 Automatic mode
Automatic mode is active when the transmitter is first turned on. “SIG” is shown on the display.
4.1.2 Manual mode
Press the mode button to select manual mode.
When the manual mode is selected the symbol “SENSE” is displayed.
4.1.3 AC Non-Contact Voltage (NCV) detection mode
Press the NCV button to switch between cable locator mode and non-contact voltage detection mode