www.megger.com F
5
Safety Warnings and Standards
2. Safety Warnings and Standards
2.1 Warnings, cautions and notes
This user guide follows the internationally recognised definition. These instructions must be adhered to at all
times.
Description
WARNING : Indicates a potentially dangerous situation which, if ignored, could lead to
death, serious injury or health problems.
CAUTION : Indicates a situation which could lead to damage of the equipment or
environment
NOTE : Indicates important instructions to be followed to perform the relevant process
safely and efficiently.
Icon Description
F
Warning: High Voltage, risk of electric shock
This WARNING symbol indicates a potentially hazardous situation, which if not
avoided, could result in death or serious injury, or result in damage to the product.
G
Caution: Refer to user guide.
The respective accident prevention regulations established by the associations for
electrical systems and equipment must be strictly met at all times.
UK conformity. This equipment complies with current UK legislation
c
EU conformity. Equipment complies with current EU directives.
Comply with EMC.
Do not dispose of in the normal waste stream.
Battery symbol
CAT III
IEC Overvoltage Category
CAT III equipment is designed to protect against transients in equipment in fixed
equipment installations, such as distribution panels, feeders and short branch
circuits, and lighting systems in large buildings.
t
Double insulated
To Next Page
Loading...
General