Need help?Do you have a question about the Megger MFT1845 and is the answer not in the manual?
General| Type | Multifunction Tester |
|---|---|
| Insulation Resistance Test Voltage | 250V, 500V, 1000V |
| Earth Resistance Test | Yes |
| Continuity Test Current | 200 mA |
| RCD Test | Yes |
| Phase Rotation | Yes |
| Display | Backlit LCD |
| IP Rating | IP54 |
| Operating Temperature | -10 °C to +55 °C |
| PSC/PFC Range | 20 kA |
| RCD Trip Current | 10 mA, 30 mA, 100 mA, 300 mA |
Describes the instrument's display elements and indicators for loop impedance tests.
Explains the Confidence Meter's role in analyzing electrical noise for loop impedance tests.
Details the procedure and considerations for 3Lo loop impedance measurements.
Illustrates connection diagrams for 3Lo loop impedance tests.
Explains the warning screen indicating circuit suitability for RCD types.
Illustrates how the analogue arc changes with noise levels during loop impedance tests.
To Next Page
