Need help?Do you have a question about the Megger MIT485/2 and is the answer not in the manual?
General| Continuity Range | 0.01 Ω to 1000 Ω |
|---|---|
| Continuity Test Current | 200 mA |
| Voltage Range | 0 V to 600 V AC/DC |
| Frequency Range | 15 Hz to 400 Hz |
| Display | LCD with backlight |
| IP Rating | IP54 |
| Safety Rating | CAT IV 600 V |
| Insulation Test Voltages | 250 V, 500 V, 1000 V |
| Test Current | 1 mA |
| Safety Standards | IEC 61010-1 |
Key safety warnings and precautions for operating the instrument safely and correctly.
Connecting test leads for 2-terminal and 2-terminal with Guard measurements.
Detailed explanation of 3-terminal connection methods and how to operate the instrument.
Procedure for performing insulation resistance tests using 2 terminal connections.
Covers buzzer functions, PASS/FAIL indicators, insulation test locking, and leakage current.
Details on Polarisation Index (PI), Dielectric Absorption Ratio (DAR), and Timed tests.
Performing insulation tests using 3 terminal connections and the ESD testing mode.
Procedure for performing continuity tests using 2 terminal connections.
Guide to navigating the SETUP menu and customizing instrument functions and settings.
To Next Page
