Need help?Do you have a question about the Megger MIT481/2 and is the answer not in the manual?
General| Continuity Test Current | 200 mA |
|---|---|
| Storage Temperature | -25°C to +70°C |
| Test Voltage | 250 V, 500 V |
| Voltage Range | 600 V AC/DC |
| Display | LCD |
| Battery Type | AA alkaline batteries |
| Battery Life | Approx. 1000 tests at 20°C |
| Operating Temperature | -10°C to +50°C |
| Safety Standards | IEC 61010-1 |
Mandatory safety precautions and precautions for using the instrument safely and correctly.
Description of the instrument's main functions, rotary knob, and keypad button operations.
Explanation of the various symbols and readings shown on the instrument's display.
Diagrams and descriptions of the different terminal connections available on the instrument.
Procedures for AC TRMS and DC voltage measurements using 2-terminal connections.
Procedure for performing insulation resistance tests using 2-terminal connections.
Details on performing insulation tests with variable voltage settings on specific models.
Explanation and procedure for Polarisation Index (PI) and Dielectric Absorption Ratio (DAR) tests.
Performing insulation resistance tests using 2 or 3 test leads with 3-terminal instruments.
Procedure for performing continuity tests using 2-terminal connections and MIT2500.
Procedure for storing measured test results in the instrument's memory.
Guide to accessing and configuring various instrument settings via the SETUP menu.
Information on checking battery status and the procedure for replacing batteries.
Detailed steps for safely removing and replacing the instrument's batteries.
Step-by-step instructions for replacing blown fuses in the instrument.
To Next Page
